ELITEpro portable power datalogger with 3 x 5A CT Bundle

Full Review

ELITEpro Technical Specifications

3 Voltage Channels.......... 0-600 Volts AC or 0-800 Volts DC,   Higher AC voltages can be measured with a Potential (voltage) Transformer

4 Current Channels.......... 0-333 mV AC or 0-600 mV DC,   Corresponding to 0-6,000+ Amps depending on current transformer selected

Current Transformers...... Uses voltage output CTs (0-333mVAC) for maximum safety.  Compatible with DENT Instruments DATApro^TM and Energy Logger CTs

Measurement Type........... True RMS using high-speed digital signal processing (DSP)

Line Frequency................. 60, 50, or 400 Hz and DC

Harmonic Sensitivity........ 1st through 50th

Waveform Sampling......... 128 times per cycle

Measurements ................. Volts, Amps, kW, kVAR, kVA, and Power Factor Maximum, Minimum, Average, (All Parameters) also kWh, kVARh, kVAh, Ah

Harmonics......................... DC and Fundamental through 50^th (odd and even), Total Harmonic Distortion, Crest Factor, for both Current and Voltage.

Waveform Capture........... Voltage, Current, Power

Accuracy............................ Better Than 1% (<0.5% typical) for V, A, kW, kVAR, kVA, PF exclusive of sensor error

Resolution......................... 12 bit A/D plus sign (1 part in 4,096):   0.01 Amp,  0.1 Volt, 1 watt, 1 VAR, 1 VA,  0.01 Power Factor

Memory.............................. 128 kBytes standard (~25,000 readings), or 512 kB (~100,000 readings)

Memory Types.................. Ring (continuous, write newest over oldest), or Linear (stop when full)

Recording Intervals.......... 3, 15, 30 seconds, 1, 2, 5, 10, 15, 20, 30 minutes and 1, 12, 24 hours 

Indicators........................... 2 LEDs:  Green to signal when logging, Red to signal low battery

Communication

    Direct.............................. RS-232 to PC via 9 pin null modem cable

    Communication Rate... 1200, 2400, 4800, 9600, 19200, 28800, 57600 baud

    Modem........................... Internal 1200, 2400, 4800, 9600, 14400 baud, auto-answer, auto-dial modes

    ELOG Software............. Programs Logger, Displays Current Metered Values, Retrieves Data

Data Formats..................... ASCII and Binary

Power................................. Internal Lithium Battery; For external power use a Listed (US/Canada) or Certified (non-US) power supply rated 9 VDC minimum 150 mA and marked “Class 2”,Limited Power Source, or LPS

Battery Life........................ ~3 years, LED indicator of low battery charge

Analog Sampling Rate..... 3 seconds on external DC power,  1 minute when on internal battery

Clock.................................. Crystal controlled internal Real Time Clock, 20 ppm (<1 min/month)

Mechanical

  Operating Temperature. -7 to + 60 oC (20 to 140 oF)

  Humidity.......................... 5% to 95% non-condensing

  Enclosure........................ Indoor: High Impact ABS Plastic, UL 94-V0 flame rating

Outdoor:  Weather tight enclosure, Polycarbonate UL 94-V2 flame rating

  Weight.............................. 0.4 kg  (11 ounces) without modem

  Dimensions..................... 8 X 15 X 6 cm   (3.2”  X 5.9” X 2.4”)  Indoor Enclosure

Case studies

Dent FLN Rogowski Coils