Home » Three Phase » Portable Three Phase Analyzers » SUM PK414 Power Quality Analyzer Bundle w/ 4xHA1000A clamp-on CTs
SUM PK414 Power Quality Analyzer Bundle w/ 4xHA1000A clamp-on CTs
Part Number:
SUM PK414
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$5970.00 
USD (change)
USD (change) 
The
PowerSight 4000 Three Phase Power Quality Analyzer is our most powerful
analyzer. It is a stunning technical achievement, oriented towards the
demanding needs of power quality analysis. In addition to doing all
that the PS3000 does, it does complete harmonic analysis on every
cycle, captures swells and sags on every half cycle, and captures
transients with a resolution of 8 microseconds. It does all this in a
package that is hand-sized and weighs less than 2 pounds!
The PowerSight 4000 Three Phase Power Quality Analyzer provides complete answers to your power quality and power analysis questions in an incredibly small, powerful, and intuitive package. The PowerSight 4000 provides complete analysis in power quality applications (swell / dip / inrush / transient / harmonic detection) in addition to supplying exact measurements of all common power quantities
Compare these features to any other instrument:
What's Included:
The PowerSight 4000 Three Phase Power Quality Analyzer provides complete answers to your power quality and power analysis questions in an incredibly small, powerful, and intuitive package. The PowerSight 4000 provides complete analysis in power quality applications (swell / dip / inrush / transient / harmonic detection) in addition to supplying exact measurements of all common power quantities
Compare these features to any other instrument:
- Complete harmonic analysis of every cycle of all three voltages and all four currents, simultaneously, while doing all other functions.
- Swell, sag, and inrush detection of every half cycle of all three voltages and all four currents, simultaneously, while doing all other functions.
- Transient detection and wave capture on all three voltage inputs and all four current inputs, simultaneously, while doing all other functions.
- Complete power/energy/cost analysis of single phase, two phase, three phase, and 3˝ phase circuits while simultaneously doing harmonic, swell, sag, and transient analysis on all inputs.
- Compatible with VSD outputs. Works on 22-200 Hz, 360-440 Hz and DC power.
- Complete logging, triggering, and waveform capture capability.
- Internal rechargeable battery with charge level indicator for 8-10 hours of hand-held use or power-fail operation. Includes wall charger.
What's Included:
- PS4000 with Harmonics, Data Logging, PC Control
- Four (4) HA1000 Current Probes
- Voltage Leads
- Hard-Shell Carrying Case
- And 120 Volt Charging Unit
- Operating Manual.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- Swells/Dips/Transients (time/date, magnitude, duration, quantity, waveforms/graphs)
- Harmonic Distortion - (THD and individual harmonics) of any voltage or current
- Voltage - (maximum, minimum, average and present RMS voltage)
- Current - (maximum, minimum, average and present RMS current)
- Power - True RMS Power, Reactive VAR Power and Apparent VA Power
- True Power Factor & Displacement Power Factor-(A, B, C Phases and Total)
- Energy - (use per hour, month and year) Cost - (per hour, month and year)
- Peak Demand Period and Peak VA Period- (date/ time/ KWH and date/time/KVA)
- Frequency - (maximum, minimum, average and present frequency)
- Duty Cycle - (average on and off time) Power Cycle - (on/off Cycles)
- Time - (present, elapsed time, time that monitoring began)
All Measurements: 2,083 samples per cycle @ 60 Hz.
Transient detection: 8 µsec sampling rate on all channels, simultaneously.
Harmonic analysis: analysis to the 63rd harmonic of every cycle of all channels, simultaneously.
Swell/sag detection: measurement of RMS voltage and current of each half cycle.
Accuracy: 0.1% +/- 2 LSDs from 1 volt to 600 volts. 0.1% +/- 2 LSDs plus accuracy of current probe.
Power Analysis: all relevant measurements of any power configuration (including DC).
Battery Operation: 6 - 8 hours, operates while charging off wall charger, includes battery charge indicator.
Ranges with the following current clamps:
FX5000: 100 to 5000 amps AC
FX3000: 10 to 3000 amps AC
HA1000: 1 to 1000 amps AC
DC600: 5 to 400 amps AC/DC 400 to 600 amps DC
HA100: .1 to 100 amps AC
HA5: .02 to 5 amps AC
Transient detection: 8 µsec sampling rate on all channels, simultaneously.
Harmonic analysis: analysis to the 63rd harmonic of every cycle of all channels, simultaneously.
Swell/sag detection: measurement of RMS voltage and current of each half cycle.
Accuracy: 0.1% +/- 2 LSDs from 1 volt to 600 volts. 0.1% +/- 2 LSDs plus accuracy of current probe.
Power Analysis: all relevant measurements of any power configuration (including DC).
Battery Operation: 6 - 8 hours, operates while charging off wall charger, includes battery charge indicator.
Ranges with the following current clamps:
FX5000: 100 to 5000 amps AC
FX3000: 10 to 3000 amps AC
HA1000: 1 to 1000 amps AC
DC600: 5 to 400 amps AC/DC 400 to 600 amps DC
HA100: .1 to 100 amps AC
HA5: .02 to 5 amps AC
PowerSight can provide you with a complete range of reports to serve
your needs. Our Report Generator and PowerSight Manager (PSM) software
provide you with the graphical reports, tabular reports, and raw data
that you need.
Comparison Reports
(Before/After, On/Off, Good/Bad, etc.) The Report Generator has a 4 step process for preparing reports to compare data from data logs. The process is quite easy and fast to perform. It results in a concise tabular report comparing the “before” results with the “after” results (including estimated KWH and cost) with optional appended graphs. The before and after columns are followed by a column showing the actual change between them and the percent change between them.
Sections of different logs can be compared or even sections of the same log can be compared. The report is previewed as a document that you can edit on-screen. Once previewed, it is quick and easy to modify any of the settings and run the report again. The ease and power of this reporting mechanism makes it a favorite for presenting results to decision-makers.
Summary Reports (Overall Results)
The Report Generator has a 3 step process for preparing reports summarizing data from data logs. The process is quite easy and fast to perform. It results in a concise tabular report presenting the variables of interest, including estimated KWH and cost, with optional appended graphs.
The report is previewed as a document that you can edit on-screen. Once previewed, it is quick and easy to modify any of the settings and run the report again. The ease and power of this reporting mechanism makes it a favorite for presenting baseline data.
Trending Graphs (Data Log Graphs)
Our PSM software makes viewing data logs easy. In a 2 step process, any variable of the log can be presented graphically. Dozens of pre-arranged combinations of variables guide you to an uncluttered and relevant presentation comparing variables of interest. Labelswith arrows can be added to highlight areas of interest.
gain control over the timeframe presented and the relative size of the data presentation.By using the zoom and scalingfeatures, you At the top of each graph, each variable is summarized with a single numberfor simplicity. A graph of averages is summarized to the average of the averages. A graph of maximums is summarized to the maximum of the maximums and a graph of minimums is summarized to the minimum of the minimums.
While viewing the data within PSM, moving your cursor over a data point reveals the actual values and time/datestamp at that point.
Custom Graphs (And Raw Data)
The data logs from PowerSight can be easilyimported into Microsoft Excel and otherspreadsheet programs in order to make customgraphs or to view raw data. It is a tab delimited text file with column headings, so the data is easily understood.
Harmonics Analysis Reports
PSM offers three types of harmonics analysis reports.When THD is recorded in a data log, the THD of up to seven signals can be presented on the same graph over time and printed out. The averages of each are presented at the top.
When wave sets are received by PSM, they canhave a detailed harmonic analysis done afterone click of a mouse. The resulting harmonic bar chart compares magnitudes of each harmonic to the 50th. You can control the range of harmonics and their scale in order to print out graphical comparisons of before and afterresults of your harmonic abatement activities. At the click of a mouse, the graphical data canbe presented as a table for a concise presentation of magnitude and phase of each harmonic, plus THD and K factor.
Streaming Data (Recording Core Variables Each Second)
PSM has a provision for putting an attached PowerSight unit into “summary measurement” mode. In this mode, PowerSight transmits the voltages, currents, watts,and VA of each phase once a second. This data is displayed on the computer screen,scrolling up one line each second. If the data is directed to a file, it is also recorded as a tab delimited text file, suitable for import into another program for extensive dataanalysis of core measurements recorded each second for as long as the PC has room tostore the data.
Automated Process Control Output
PowerSight can be used in process control or alarm applications. When it is first turnedon, if a certain data sequence is sent to it, PowerSight will then send out the streaming data discussed above in a binary representation of floating point numbers. The control or alarm system can interpret the data as it arrives each second.
Comparison Reports (Before/After, On/Off, Good/Bad, etc.) The Report Generator has a 4 step process for preparing reports to compare data from data logs. The process is quite easy and fast to perform. It results in a concise tabular report comparing the “before” results with the “after” results (including estimated KWH and cost) with optional appended graphs. The before and after columns are followed by a column showing the actual change between them and the percent change between them.
Sections of different logs can be compared or even sections of the same log can be compared. The report is previewed as a document that you can edit on-screen. Once previewed, it is quick and easy to modify any of the settings and run the report again. The ease and power of this reporting mechanism makes it a favorite for presenting results to decision-makers.
Summary Reports (Overall Results) The Report Generator has a 3 step process for preparing reports summarizing data from data logs. The process is quite easy and fast to perform. It results in a concise tabular report presenting the variables of interest, including estimated KWH and cost, with optional appended graphs.
The report is previewed as a document that you can edit on-screen. Once previewed, it is quick and easy to modify any of the settings and run the report again. The ease and power of this reporting mechanism makes it a favorite for presenting baseline data.
Trending Graphs (Data Log Graphs) Our PSM software makes viewing data logs easy. In a 2 step process, any variable of the log can be presented graphically. Dozens of pre-arranged combinations of variables guide you to an uncluttered and relevant presentation comparing variables of interest. Labelswith arrows can be added to highlight areas of interest.
gain control over the timeframe presented and the relative size of the data presentation.By using the zoom and scalingfeatures, you At the top of each graph, each variable is summarized with a single numberfor simplicity. A graph of averages is summarized to the average of the averages. A graph of maximums is summarized to the maximum of the maximums and a graph of minimums is summarized to the minimum of the minimums.
While viewing the data within PSM, moving your cursor over a data point reveals the actual values and time/datestamp at that point.
Custom Graphs (And Raw Data)The data logs from PowerSight can be easilyimported into Microsoft Excel and otherspreadsheet programs in order to make customgraphs or to view raw data. It is a tab delimited text file with column headings, so the data is easily understood.
Harmonics Analysis ReportsPSM offers three types of harmonics analysis reports.When THD is recorded in a data log, the THD of up to seven signals can be presented on the same graph over time and printed out. The averages of each are presented at the top.
When wave sets are received by PSM, they canhave a detailed harmonic analysis done afterone click of a mouse. The resulting harmonic bar chart compares magnitudes of each harmonic to the 50th. You can control the range of harmonics and their scale in order to print out graphical comparisons of before and afterresults of your harmonic abatement activities. At the click of a mouse, the graphical data canbe presented as a table for a concise presentation of magnitude and phase of each harmonic, plus THD and K factor.
Streaming Data (Recording Core Variables Each Second)PSM has a provision for putting an attached PowerSight unit into “summary measurement” mode. In this mode, PowerSight transmits the voltages, currents, watts,and VA of each phase once a second. This data is displayed on the computer screen,scrolling up one line each second. If the data is directed to a file, it is also recorded as a tab delimited text file, suitable for import into another program for extensive dataanalysis of core measurements recorded each second for as long as the PC has room tostore the data.
Automated Process Control Output
PowerSight can be used in process control or alarm applications. When it is first turnedon, if a certain data sequence is sent to it, PowerSight will then send out the streaming data discussed above in a binary representation of floating point numbers. The control or alarm system can interpret the data as it arrives each second.
Case studies
No user reviews available.
