Home » Fluke Ti30 Thermal Imager
Fluke Ti30 Thermal Imager
Part Number:
FE TI30
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$9995.00 
USD (change)
USD (change) 
The Fluke Ti30 Thermal Imager is just what
you need to make an effective predictive maintenance program easy,
fast, accurate and affordable. It’s the tool you’ll reach for again and
again for scheduled inspections, quick spot checks, and everything in
between. Start or enhance your predictive maintenance program with the
imager that gives you the features, software, and temperature range
without the big price tag.
Complete imaging solution - The Ti30 thermal imager is packaged with all necessary accessories, unlimited-use InsideIR companion software, and two days of professional thermography training.
Fast and easy inspection routing - Plan your equipment inspection route, load it once into the imager, and then follow the easy, on-camera instructions each time you perform inspections.
Designed for industrial use - With over five hours of continuous-use battery life and the capacity to store up to 100 images, it allows for a full day of uninterrupted inspections.
Lowest cost of ownership - An exceptional value for a high performance imager, the Ti30 also offers affordable instrument service and calibrations.
What's Included:
The Fluke Ti30 Thermal Imager uniquely supports thermography inspection routing. After the first inspection, the images taken can be combined in the InsideIR software with location names and temperature data, and uploaded to the imager for use as a routing guide. During subsequent inspections, an on-camera display prompts the user ehttp://us.fluke.comxactly where to take images—improving accuracy. The new images are easily compared to previous scans, helping to identify potential problems before they cause failure.
Maintenance personnel can quickly and
easily capture high-quality infrared images using the Fluke Ti30
Thermal Imager. Because the camera collects 12 bits of information for
every one of its 19,200 pixels, users in the field can simply point,
focus and shoot. With a properly composed, well-focused image, all
further analysis can be performed with the InsideIR software in the
quiet, comfort and safety of an office.
Complete imaging solution - The Ti30 thermal imager is packaged with all necessary accessories, unlimited-use InsideIR companion software, and two days of professional thermography training.
Fast and easy inspection routing - Plan your equipment inspection route, load it once into the imager, and then follow the easy, on-camera instructions each time you perform inspections.
Designed for industrial use - With over five hours of continuous-use battery life and the capacity to store up to 100 images, it allows for a full day of uninterrupted inspections.
Lowest cost of ownership - An exceptional value for a high performance imager, the Ti30 also offers affordable instrument service and calibrations.
What's Included:
- Multi-language Interactive Manual (CD ROM)
- 2 Day professional training with Snell Infrared
- InsideIR Software - Unlimited use included in purchase price
- Docking station with Universal Power Adapter and USB Connection
- Hardshell Carrying Case
- USB Computer Cable
- Rechargeable and Non-rechargeable Battery Packs (batteries not included)
- Multi-Language Thermography Training Presentation (CD ROM)
- Carrying Pouch
- Wrist Strap
- Quick Reference Card
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
In the imager during the scan, or later in the InsideIR software, adjust:
This approach provides flexibility and eliminates the need to re-scan equipment if different settings are desired once the user is back in the office. The file of images and data can also be e-mailed to other Ti30 imager-InsideIR software users, making information sharing and cross-checking easy.
|
The Fluke Ti30 Thermal Imager:
|
Adjustments on the Fluke Ti30 Imager include:
|
|
Start up screen makes it easy to determine instrument status including:
|
|
Display icons include:
|
| Key Specifications | |||
| Temperature measurement accuracy |
| ||
| Repeatability |
| ||
| Lightweight (including battery) |
| ||
| Array size |
| ||
| Display frequency |
| ||
| NETD |
| ||
| Specifications | |||||||||||||||||||||||||||
| Thermal Specs |
| ||||||||||||||||||||||||||
| Optical/IR |
| ||||||||||||||||||||||||||
| Controls |
| ||||||||||||||||||||||||||
| Operational |
| ||||||||||||||||||||||||||
| Electrical |
| ||||||||||||||||||||||||||
| Other |
| ||||||||||||||||||||||||||
InsideIR software, a Windows based PC application for thermal analysis and reporting, is included in the Fluke Ti20 and Ti30 thermal imagers.
Some of the tools built into the package include:
System Requirements:
Some of the tools built into the package include:
- Temperature spots
- Histograms
- Isotherms
- Emissivity and reflected temperature compensation
System Requirements:
- One of the following operating systems Microsoft® Windows® Vista, Microsoft® Windows® XP, or Microsoft® Windows® 2000 with SP3
- Version of Internet Explorer 6.0 or greater
- Microsoft .NET Framework 2.0 (Included as part of the InsideIR 4.0 installation)
- Personal computer with a 1 GHz processor (faster recommended)
- 512 megabytes (MB) of RAM for Microsoft® Windows® XP or Microsoft® Windows® 2000 and 1 gigabyte (GB) of RAM for Microsoft® Windows® Vista
- SuperVGA monitor with the screen resolution set at 1024 x 768 or greater; small fonts setting; and true color (32 bits)
- CD ROM drive
- USB rev. 1.1 port
- USB port (USB 2.0 recommended)
- Mouse or pointing device
- Printer, optional for printing reports
Product brochures
Building Diagnostics
Case studies
Electrical distribution
Electro-mechanical
Electronics
In plant electrical
Mechanical systems
Product training
Product manuals
Virtual demos
No user reviews available.
