Home » Fluke Ti55FT-20 IR FlexCam Thermal Imager with IR-Fusion
Fluke Ti55FT-20 IR FlexCam Thermal Imager with IR-Fusion
Part Number:
FE Ti55FT-20
In Stock?
Stock may be available
please call (877)766-5412 to confirm
please call (877)766-5412 to confirm
Quantity
Price:
$26490.00 
USD (change)
USD (change) 
Choose the Fluke Ti50 or the Fluke Ti55 models when you need the best
images. They feature 320 x 240 detectors with industry leading thermal
sensitivity (≤ 0.05 °C NETD) for high resolution, ultra high-quality
images. In addition, with a 60 Hz detector acquisition rate
temperatures are displayed live on the large 5-inch color display.
The FT models feature the innovative IR-Fusion™ technology. IR-Fusion captures a visible light image in addition to the infrared image and takes the mystery out of IR image analysis. It helps to better identify and report suspect components and enable the repair to be done right the first time. To find out more select IR-Fusion on the side navigation of this page.
See exactly what you are viewing
Fluke IR-Fusion™ technology (available on FT models) links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.
Large, sharp thermal images
Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.
A sharp image in every situation
The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.
Make anomalies visible
Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.
Analysis and reporting comes standard
The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the side navigation of this page.
Radiometric measurement – the ‘data behind the picture’
Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.
Typical applications:
What's Included:
The FT models feature the innovative IR-Fusion™ technology. IR-Fusion captures a visible light image in addition to the infrared image and takes the mystery out of IR image analysis. It helps to better identify and report suspect components and enable the repair to be done right the first time. To find out more select IR-Fusion on the side navigation of this page.
See exactly what you are viewing
Fluke IR-Fusion™ technology (available on FT models) links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.
Large, sharp thermal images
Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.
A sharp image in every situation
The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.
Make anomalies visible
Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.
Analysis and reporting comes standard
The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the side navigation of this page.
Radiometric measurement – the ‘data behind the picture’
Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.
Typical applications:
- Predictive maintenance – Identify electrical and mechanical problems before they cause failure
- Power/utilities – Real-time analysis of substations, transmission lines and equipment
- Process monitoring – Real-time observation to ensure efficient and safe operation
- Research and development – Quantify heat patterns to improve product designs
- Electronic design – Close up circuit board analysis
What's Included:
- Heavy duty carrying case
- 2 rechargeable battery packs
- Battery charger
- AC adapter
- Video cable
- 512 MB compact flash card
- Compact flash card reader and USB cable
- PCMCIA compact flash card reader
- Neck strap
- SmartView reporting and analysis software on CD
- User manual on CD
- Calibration certificate
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- High resolution, low noise VOx detector for high quality images: 320 x 240
- Temperature range to cover broad industrial applications: -20 to +600 ºC
- (-4 to 1112 ºF)
- High thermal sensitivity for viewing even the smallest temperature differences: ≤0.05 ºC
- 180º articulating flexible lens to view images in every situation
- Choice of 3 interchangeable lenses to cover every application
- Large 5" high contrast color LCD for a clear picture independent of lighting conditions
- Fully radiometric for detailed temperature analysis and tracking
- SmartFocus for best image quality and accurate temperature measurements
- Windows® CE based menu structure for ease of use
- Personalized instrument set-up for multiple use
- CompactFlash memory cards to store over 1000 IR images plus fully radiometric temperature data
- SmartView reporting and analysis software included
- AutoCapture for making intermittent problems visible
- On-board analysis functions
- User defined text annotations for simplified reporting
- Built-in visible light (digital) camera
- IR/Visible Alarm function
- Laser pointer for easy targeting
- Flash and torch light for high quality images in dark environments
| Imaging performance |
|
| Temperature measurement |
|
| Image presentation |
|
| Optional lenses |
|
| Image and data storage |
|
| Interfaces and software |
|
| Laser (IR-Fusion models only) |
|
| Controls and adjustments |
|
| Power |
|
| Environmental and mechanical design |
|
| Other |
|
Fluke SmartView IR analysis and reporting software
Fluke
SmartView™ software is included with each Fluke IR FlexCam® Thermal
Imager. This powerful software is a modular suite of tools that
annotates, views, edits and analyzes IR images. It also generates fully
customizable and professional-looking reports in a few easy steps. The
software is easy to use for maintenance personnel, yet delivers the
performance specialized thermographers require for advanced analysis.
Image viewing and editing
Navigate, analyze and enhance IR images Organize data with extensive annotations Optimize images and quickly reveal issues
System requirements
Fluke
SmartView™ software is included with each Fluke IR FlexCam® Thermal
Imager. This powerful software is a modular suite of tools that
annotates, views, edits and analyzes IR images. It also generates fully
customizable and professional-looking reports in a few easy steps. The
software is easy to use for maintenance personnel, yet delivers the
performance specialized thermographers require for advanced analysis.Image viewing and editing
- Displays an array of open images for convenient selection and analysis
- A simple mouse click displays the temperature at any given point
- Color palettes, reference images, markers and emissivity can be edited
- Add annotations to images in the camera or in the PC software
- Input information such as locations, category and other notes
- Reference images can be linked together for good/bad and before/after analysis
- Annotations can be included in reports
- Alter emissivity and background temperature to enhance contrast or display detail more effectively
- A complete set of marker tools are provided (Hot, Cold, Center Point, Center Box, etc.)
- Five viewing modes enable image optimization based on application needs (IR-Fusion models only)
- Generate professional customized reports fast
- One-click report generation for a quick result
- Choice of features including before/after, IR plus visible light, annotations, supporting data and graphics
- Report wizard guides the user through report generation
Navigate, analyze and enhance IR images Organize data with extensive annotations Optimize images and quickly reveal issues
System requirements
- Windows® 98SE/ME/NT4/2000/XP
- A web browser for product registration. Internet Explorer 5.0 or newer or Netscape® 5.0 or newer
- CompactFlash memory card reader
- 20 MB available disk space, not counting space requirements for web browser
- 16-bit color, 800 x 600 resolution video or better’
- Color printer for printing the images
- CD-ROM drive (for installing SmartView software)
|
|
Product brochures
Building Diagnostics
Electrical distribution
Electro-mechanical
Electronics
In plant electrical
Mechanical systems
Other
Process monitoring
Product training
Technical training
Product manuals
Virtual demos
No user reviews available.
